Timelapse+ VIEW for Android

(Official App for the Timelapse+ VIEW Intervalometer. Requires the VIEW Intervalometer, a powerful stand-alone camera controller for advanced time-lapse with fully automated day/night transitions, available at https://www.timelapseplus.com)

Capturing a Holy Grail time-lapse just became easier than ever! Once you connect the Timelapse+ VIEW app to the VIEW Intervalometer, you will be holding access to the most advanced intervalometer in the world. The app is easy to set up and start a time-lapse and advanced users will have access to their time-lapse like never before!

The app is designed to fit your life. Are you camping out in a tent? Connect to the VIEW via the built-in wifi hotspot and keep an eye on your time-lapse.

What about if you're working on a long-term construction time-lapse? You can now access your active time-lapse, preview status and make adjustments all while standing in line for your morning coffee!

The VIEW does not require the app to be connected at all times; the app can be used to start the time-lapse, disconnected, then later connect and check on the progress. Once running, the VIEW manages everything on its own.

This app allows remote configuration and monitoring, as well as additional features not supported by the VIEW alone. The VIEW does not require the app to be connected at all times; the app can be used to start the time-lapse, disconnected, then later connect and check on the progress. Once running, the VIEW manages everything on its own.

Key features:

- Now you can have confidence that your time-lapse is recording. Get an instant preview of the time-lapse even while it's still recording.

- Fully automated day to night and night to day time-lapse, with manual override possible right from the app

- Monitor the time-lapse while it's running, including playing an instant preview

- Make live changes to time-lapse parameters while it's running, with the ability to gradually apply changes over a set number of frames

- Easily adjust focus manually while the time-lapse is running (with supported cameras)

- Keyframe programming for focus and motion (with supported motion systems)

- Automatic sun/moon motion tracking (with supported pan/tilt motion systems)

- Schedule time-lapse with daily start/stop times and weekly schedule

The app connects to the VIEW via the Internet (where the VIEW is connected to the Internet via Wifi), or directly to the VIEW's Wifi hotspot for use when nearby the VIEW with no Internet available.

More info on the VIEW Intervalometer at https://www.timelapseplus.com