ActiveOBD for Subaru for Android

Download now

Used ActiveOBD for Subaru for Android? Share your experience and help other users.

Key Details of ActiveOBD for Subaru

Multi function display app for Subaru vehicle MY 2012+ (not official)
Last updated on March 29, 2025
There have been 2 updates
Virus scan status:
Clean (it’s extremely likely that this software program is clean)

Developer’s Description

By ActiveOBD.com

Multi function display app for Subaru vehicle MY 2012+ (not official)

The ActiveOBD offers a free and simple multi functional information display for your Subaru vehicle. Despite the initial stage of its development, the application is able to reveal some sensitive information missing on the display you might already have.The ActiveOBD fetches the information directly from your vehicle via the OBD port and operates completely independently from the multi function display of your vehicle so you're absolutely free to use both in parallel.Requirements:- Subaru vehicle MY 2012+ (OBD CAN communication protocol)- ELM327 Bluetooth adapter v1.5 (the v2.1 is not supported so far)Dynamics mode- front wheels position- Torque split front-rear (Subaru AWD) *- front-rear Slit (over-rotation)Also:- Coolant temperature- Engine oil temperatureState mode- Automatic transmission (AT / CVT) Oil deterioration degree- Fuel Level (percent of total tank capacity) **- alternative Fuel Consumption counter since last refill ***Trouble Codes mode- Diagnostic Trouble Codes (OBD DTC) with Subaru-specific description- clearing trouble codesNotes:* The Subaru AWD system has some hydraulic pressure active constantly providing about 5% torque transferring from front to rear. Further torque distribution is done dynamically (on demand), ActiveOBD shows this dynamic value.** The fuel level is a subject for fluctuations. The application needs about 5 minutes of continuous running in dynamics or state mode before the fuel level value can be displayed.*** A standard fuel consumption calculation approach is based on fuel amount counter at the time of its consumption. ActiveOBD offers an alternative a calculation based on mileage and fuel level (in percent). According to the current implementation the counter is being reset on refill (done with ignition switched off), just open the State mode after refilling the fuel consumption counter should reset automatically.You have to pair with the ELM327 device before using this application, Google Nexus guide (Pair with a Bluetooth device) :https://support.google.com/nexus/answer/2819579?hl=enContent rating: Everyone