theVariometer for iOS

Download now

Used theVariometer for iOS? Share your experience and help other users.

Key Details of theVariometer

This nice little tool - a must have for every paraglider pilot - emulates a variometer on your iPhone. Since version 3.0 the app supports iOS9, as...
Last updated on June 10, 2016
Virus scan status:
Clean (it’s extremely likely that this software program is clean)

Developer’s Description

By Ronald Schmieder

This nice little tool - a must have for every paraglider pilot - emulates a variometer on your iPhone. Since version 3.0 the app supports iOS9, as...

This nice little tool - a must have for every paraglider pilot - emulates a variometer on your iPhone. Since version 3.0 the app supports iOS9, as well as the pressure sensor of your iPhone 6(s) or iPhone 6(s) Plus. Therefore your iPhone is a complete replacement for a "real" variometer. In conjunction with an external sensor such as ASI FlyNet2, FlyTec SenseBox or the XC-TRacer, the app provides even more precise climb- and sink-rates. You can use it to measure - climb/decline rate - absolute altitude - hight over ground - relative height - speed over ground and - courseValues displayed in meters or feet/kn.The current climb- or sink-rate is signaled via different "beep" sounds, as usual for a variometer. You can watch your flight using the integrated map view in real time, so you will never loose your orientation. Even if your are flying accidentally within a cloud or under poor visibility conditions!By typing to Alt 3 - usually after the adjusting phase - or any time later you can reset Alt 3 to 0.Moreover you can use the App to - record you flights - view your recorded flights in the integrated map view - send your recorded flights by mail as kml-files or gpx -files to your friends One last note: The app reacts a little somewhat slower, as e.g. a Bruninger- or Flytec Vario, if you use the internal pressure sensor of the iPhone, because the sensor doesn't provide data as often as an external sensor. The app requires a good GPS signal, if no internal or external pressure sensor can be used. Please make sure in any case, that you have a good GPS signal, if you use the app. The app does NOT work - completely and reliably - in buildings or other situations in which you have no or a bad GPS signal! However, this should not be a problem, since you usually flying under a clear open sky. ;-) Usage - without - an internal or external sensor is possible, but subject to known the limitations of a pure GPS operation, such as using only open-air, a good GPS signal and altitude changes > 5m with at least 1-2 m/s. Continued use of GPS running in the background can dramatically decrease battery life.Even if the App is running in background, the GPS location service is used by the App, if you record your flight!