Proximity - Access Card Calculator for iOS

Used Proximity - Access Card Calculator for iOS?

Developer’s Description

Have a "naked" access card or fob and need to determine its appropriate number and facility code? If you're able to extract the binary or...

Have a "naked" access card or fob and need to determine its appropriate number and facility code? If you're able to extract the binary or hexadecimal value then Proximity will do the rest.Proximity works one of two ways:by inputting the raw binary value of the card or by inputting the hex equivalent.To use the binary input, simply tap on the box and type in the binary value. The counter in the lower-right corner of the box will keep track of the amount of digits currently displayed.To use the hex input, tap on the box and enter the hex value. Once complete, select the bit length from the wheel below. This is only necessary when calculating from a hex value.After tapping on calculate, the output will be displayed. If there is more than one system in the same bit length, tap on Next to cycle through the different formats.More formats will be released in future versions so long as the information is acquired. If there's a format not on this app and you have the breakdown information, send it to me and I'll fulfill the request.Currently supports the following formats:26 bits HID Standard31 bits HID ADT33 bits HID Standard34 bits generic34 bits HID / Northern35 bits HID Corporate 100036 bits Simplex36 bits Lenel36 bits S237 bits HID37 bits HID (no Facility Code)37 bits HID PointGuard37 bits Software House40 bits Casi Rusco40 bits XceedID40 bits HoneywellDisclaimer: HID and Corporate 1000 are registered trademarks of HID Global Corporation or its affiliates. This application is not affiliated with nor endorsed by HID Global Corporation.