Open Road Race Timer for iOS

Download now

Used Open Road Race Timer for iOS? Share your experience and help other users.

Key Details of Open Road Race Timer

The Open Road Race Timer is designed for high speed automobile racing on closed highways. The race objective is to travel a course of known length...
Last updated on June 18, 2016
There have been 5 updates
Virus scan status:
Clean (it’s extremely likely that this software program is clean)

Developer’s Description

By MSYapps

The Open Road Race Timer is designed for high speed automobile racing on closed highways. The race objective is to travel a course of known length...

The Open Road Race Timer is designed for high speed automobile racing on closed highways. The race objective is to travel a course of known length at a set rate of speed. That combination of speed and distance translates into a target time to reach the finish line. There are separate screens for the Navigator where conditions can be set and for the Driver where progress measured against the ideal time can be presented for a heads-up display.Your starting time will also be assigned as some minute or half minute after the hour in which the race begins. Set the conditions of speed, distance and compute the time in the app Setup and let the app count down to the start of your race.Speeds can be set at 5 mph increments from 80 to 150 miles per hour. Typically, offroad races run one way over the closed course and then teams turn around and reverse the course for another run. In this app, you can set the distance between 40.00 and 120.00 miles for a single run.GPS inputs trace the path along the rally route. Measurements of actual versus ideal time and distance will be shown in seconds ahead or behind schedule. From time to time you may also record time and distance covered an the error against the ideal course time and distance by touching the Add Split button. Also, you may set automatic split computations at increments of 30 seconds, 1 minute, 3 minutes and 5 minutes.There are two ways to adjust distance measurement. An adjustment factor between 0.800 and 1.200 can be used to synchronize distance measured by GPS to race distance. This adjustment applies to all distance measurements shown after the adjustment has been selected so adjustments can be made while racing. Also, if necessary you may pause or gain time on the race by adding or subtracting time.Disclaimer: Continued use of GPS running in the background can dramatically decrease battery life.