Gauss Projector - Gauss-Kruger Projection for iOS

Used Gauss Projector - Gauss-Kruger Projection for iOS? Share your experience and help other users.

Developer’s Description

The Gauss-Krger coordinate system is implemented as a generalized Transverse Mercator projection. This projection is similar to the Mercator except...

The Gauss-Krger coordinate system is implemented as a generalized Transverse Mercator projection. This projection is similar to the Mercator except that the cylinder is longitudinal along a meridian instead of the equator. The result is a conformal projection that does not maintain true directions. The central meridian is placed on the region to be highlighted. This centering minimizes distortion of all properties in that region. This projection is best suited for land masses that stretch northsouth. The GaussKrger (GK) coordinate system is based on the GaussKrger projection.GaussKrger coordinate system. GaussKrger divides the world into zones six degrees wide. Each zone has a scale factor of 1.0 and a false easting of 500,000 meters. The central meridian of zone 1 is at 3 E. Some places also add the zone number times one million to the 500,000 false easting value. GK zone 5 could have a false easting value of 500,000 or 5,500,000 meters. Three degree GaussKrger zones exist also.The UTM system is similar. The scale factor is 0.9996, and the central meridian of UTM zone 1 is at 177 W. The false easting value is 500,000 meters, and southern hemisphere zones also have a false northing of 10,000,000.[Features] 1) support direct and inverse solution of Gauss-Krger Projection.2) support 3 and 6 zone-dividing.3) support several types of reference ellipsoid.4) support using GPS to get the location, and transform it to GaussKrger coordinate. 5) support moving the pin on the map to obtain the latitude and longitude of the location, and transform them. 6) support saving the map projection results, and the history records can be viewed, deleted, cleaned up, and shared. 7) Every the historical record can be shown on the map, and each of them can be reduced again. [Location Input Method] 1) using the keyboard input by hand. 2) using the GPS positioning. 3) moving the pin on the map. [Instructions]Direct solution of the Gauss Projection:1) Select the Reference Ellipsoid.2) Tap the GPS button to get the location.3) Or Input the location using keyboard.4) Inputed the number, tap the Done button, then you can get the Gauss Coordinate.Inverse solution of the Gauss Projection:1) Select the Reference Ellipsoid.2) Input the zone number.3) Input the Gauss Coordinate components (x, y).4) Inputed the number, tap the Done button, then you can get the Geodetic Coordinate.Warning: The App supports the Universal Gauss-Krger coordinate (with false offset), based on the Natural Gauss-Krger coordinate (no false offset). You can set the configurations for it in the Setting / Help view page. The corporate settings options will change the value of coordinate y (E) only. With Translation means 500000 meters added on the natural coordinate y (E). With Zone Number means the zone number * 1000000 is added to the above value.