Qu-Control for iOS

Allen & Heath Qu-Control

Description

Qu-Control release V1.9 for iOS devices.

This version is for Qu mixers running V1.9 firmware.

Qu-Control is primarily an end user interface providing wireless mobile control for the Allen & Heath range of Qu digital mixing consoles. It provides simple configuration and set-up and allows for complex control of Qu consoles for those who have no experience with audio mixing.

Qu-Control works simultaneously with Qu-Pad and the Qu mixing consoles. Complex set-up of routing, levels and processing are carried out within the mixing console or Qu-Pad by an experienced user with Qu-Control being the GUI for the end user and operation when no technical staff are required.

Typical applications could include simple source selection to more complex venue audio management.

Qu-Control supports simultaneous connection to 7 iOS devices running Qu-Control, plus an iPad running Qu-Pad which is also available free from the Apple Store.

Qu-Control allows for the following control parameters of Qu mixing consoles;

- Input Faders

- LR On/Off buttons

- LR On/Off Radio buttons

- Master Faders

- Input Mutes

- Master Mutes

- Mute Groups

- Send Levels

- Send On/Off buttons

- Send On/Off Radio buttons

- Group Send Levels

- Group On/Off buttons

- Group On/Off Radio buttons

- Matrix Send Levels

- Matrix Send On/Off buttons

- Matrix Send On/Off Radio buttons

- Softkeys

Requirements

An Allen & Heath Qu-16, Qu-24, Qu-32, Qu-Pac or Qu-SB mixing console running V1.9n version firmware, with a suitable wireless router (wireless access point) connected to its Network port. The Qu mixer firmware and Qu-Control app maintenance version numbers n do not need to be identical, for example Qu-Control V1.90 would run with Qu mixer V1.91. Refer to the Allen & Heath web site for more information and to download the latest Qu mixer firmware.