SBBLEController for iOS

By Micono Utilities
Free
User Rating

Download now

Key Details of SBBLEController

SBBLEController will have a joypad interface, and sends the data by pressing the button in the Bluetooth LE (BLE). It is possible to connect to the...
Last updated on June 11, 2016
There have been 1 updates
Virus scan status:
Clean (it’s extremely likely that this software program is clean)

Developer’s Description

By Micono Utilities

SBBLEController will have a joypad interface, and sends the data by pressing the button in the Bluetooth LE (BLE). It is possible to connect to the...

SBBLEController will have a joypad interface, and sends the data by pressing the button in the Bluetooth LE (BLE). It is possible to connect to the device in various types of BLE, if make the module corresponding to the data, and can use the Bluetooth 4.0 BLE enabled iOS device as a controller for moving the robot, car, helicopter, etc..(1) SBBLE type peripherals Service UUID: 0xFF00 Characteristic UUID: 0x3012 Baud rate:default speed[Transmit data format]The 1 - 2nd byte: Button (Right buttons)UP: 0x0001DOWN: 0x0002RIGHT: 0x0004LEFT: 0x0008(Left buttons)Y button: 0x0010A button: 0x0020B button: 0x0040X button: 0x0100left center: 0x0080(Shift buttons)L1: 0x0200L2: 0x0400R1: 0x0800R2: 0x1000(Other)START: 0x0003SELECT: 0x000CThe 3 - 4th byte: Left analog StickLeft - Right: 1-255 (Neutral=128) Up - Down: 1-255 (Neutral=128)The 5 - 6th byte: Right analog StickLeft - Right: 1-255 (Neutral=128) Up - Down: 1-255 (Neutral=128)The 7 - 9th byte: AcceleratorX axis: 1-255 (Neutral=128) Y axis: 1-255 (Neutral=128)Z axis: 1-255 (Neutral=128)The 10th byte: Status information7 - 6th bit: Accelerator (0-3)5th bit: Left analog (0-1)4th bit: Right analog (0-1)3-1st bit: Device direction (1-4)Support Page: http://SBBLEController.micutil.comSBBLE Sample program: http://sbble.micutil.com(2) konashi Service UUID: 0xFF00 Characteristic UUID: 0x3012 Baud rate:default speed (9600bps) http://konashi.ux-xu.comUP: 0x0001 DOWN: 0x0002 RIGHT: 0x0004 LEFT: 0x0008 Y button: 0x0010 A button: 0x0020 B button: 0x0040 X button: 0x0080 START: 0x0003 SELECT: 0x000C (3) RCB default typoe peripherals Service UUID: 0xFFF0 Characteristic UUID: 0xFFF1 Transmitted data is the same as "SBBLE" type.(4) BLESerialService UUID: 569A1101-B87F-490C-92CB-11BA5EA5167CCharacteristic UUID: 569A2001-B87F-490C-92CB-11BA5EA5167CTransmitted data is the same as "SBBLE" type.http://www.robotsfx.com/robot/BLESerial.html(5) RFduinoService UUID: 2220Characteristic 2222Transmitted data is the same as "SBBLE" type.http://www.rfduino.com(6) FemtoduinoBLEService UUID: 195AE58A-437A-489B-B0CD-B7C9C394BAE4Characteristic UUID: 5FC569A0-74A9-4FA4-B8B7-8354C86E45A4Transmitted data is the same as "SBBLE" type.http://www.femtoduino.com/spex/femtoduino-ble(7) LightBlue BeanService UUID: A495FF20-C5B1-4B44-B512-1370F02D74DECharacteristic UUID: A495FF21-C5B1-4B44-B512-1370F02D74DETransmitted data is the same as "SBBLE" type.https://punchthrough.com/bean/(8) koshianService UUID: 229BFF00-03FB-40DA-98A7-B0DEF65C2D4BCharacteristic UUID: 229B3012-03FB-40DA-98A7-B0DEF65C2D4BTransmitted data is the same as "konashi" type.http://www.m-pression.com/solutions/boards/koshian