This application is developed for professional and precise diagnostics of electronic control units output for Infiniti/Nissan vehicles. Leveraging an ELM327-chipset based adapter this application allows to capture and analyze a broad set of performance and general real-time data from the engine and automatic transmission. It is capable of recording and analysing data from the CAN-bus that electronic car units use, including graphic analytics over time, statistics while detection and erasing diagnostic trouble codes (DTC) is a basic must.
-Simple and user-friendly interface
-Comprehensive set of sensors supported for Infiniti and Nissan vehicles
-More than 400 supported sensors
-Simultaneous data output for Engine and Transmission sensors
-The highest speed and precision measurements
-Historical data analytics
-The easiest DTC detection and erasing process
-The on-board computer use capability
This application is compatible only with OBD2 ELM327 chipset based adapter. Wi-Fi and Bluetooth (4.0 Low Energy) protocols are supported. Please note that due to Apple Inc. restrictions the Bluetooth adapters versions supported are only 4.0 or higher. Any lower version of Bluetooth protocol is NOT supported and never intended to be.
This Application version has been tested with Wi-Fi 1.5 version adapters and Bluetooth Viecar.
The application has not been tested to work with "ELM327 compatible" adapters rev 2.1 and other poor quality (Chinese) adapters but highly likely it's possible. Usage of the aforementioned devices is at your own risk.
Please note: This Application is intended to work with electronic control units of Infiniti/Nissan vehicles with CAN-bus diagnostic capability (K-line is not supported in this revision of Application).
Renault, Mercedes engines are not supported in this revision of Application.
Application has been tested with Nissan Murano Z52, Infiniti M37, M25, EX35, G25, G37, QX70 models. Gearbox supported is just Jatco RE7R01A modification (most of Infiniti 2010+ model year and some Nissan models).